HPI 1/10 RS4 Sport 3 Flux RTR With Falken Porsche 911 4WD – Hearns Hobbies
x

Cart
Checkout Secure
Free Shipping Over $100 to Australia AUD
Badge

HPI 1/10 RS4 Sport 3 Flux RTR With Falken Porsche 911 4WD

BRAND: HPI RACING
HPI-114350
Your Price:
$639.99
Check in Store Stock:
Quantity
 
Checkout Secure
Checkout Secure

HPI 1/10 RS4 Sport 3 Flux RTR With Falken Porsche 911 4WD

Your Price:
$639.99
+ Add To Cart

Or 10 interest free payments from $63.99 with What's this?

Note: ZipPay, Latitude Pay & LayBuy are for online purchases only.

HPI 1/10 RS4 SPORT 3 FLUX RTR WITH FALKEN PORSCHE 911 4WD

The RS4 Sport 3 is the all-new touring car chassis from HPI Racing! In development and refined for over a year, the RS4 Sport 3 features a completely sealed and highly efficient shaft drivetrain, coilover shock absorbers plus waterproof electronics. The fully contained drivetrain means there are no exposed gears, belts or drivetrain parts to get stuck with rocks or dirt. Finally, the RS4 Sport 3 is finished with realistic tires plus a licensed replica body and wheels for an authentic look that will grab the attention of all RC and motorsport enthusiasts!

HPI Racing Replica BBS Racing Wheels

The HPI Racing Porsche 911 GT3 RSR RS4 Sport 3 Flux comes properly equipped with matching realistic replica BBS mesh racing wheels. The BBS mesh racing wheels represents the classic standard racing wheel design throughout the GT racing paddock.

HPI Racing Replica Falken Tire Azenis Slick Racing Tires

Wrapped around the replica BBS mesh racing wheel are soft-compound HPI Racing replica Falken Azenis slick racing tires. The 31mm wide front tires and extra wide 35mm extra wide rear tires provides maximum high grip on road performance.

Official Replica of the Legendary Racer

Porsche 911 GT3 RSR was created especially for the 2013 Petit Le Mans 10 hour endurance event at the world famous Road Atlanta racetrack in Braselton, Georgia. Falken Tire in collaboration with FORZA MOTORSPORTS reached out to the racing fans to come up with a unique one-off livery for the iconic endurance event. Beating out all the rest of the submitted liveries was the unique urban camo inspired design which matches the aggressive stance of the RSR perfectly! Assuring the team and its unique livery a permanent place in the record books, the #17 Falken Tire Porsche 911 GT3 RSR proved its mettle by beating out all the other GT class competitors and winning the iconic endurance event!

Realistic Aerodynamic Body Details

The HPI Racing 1/10th scale Falken Tire Porsche 911 GT3 RSR authentically replicates the extensive aerodynamic details of its full scale counterpart with the adjustable replica rear wing, multi piece rear diffuser and side body aero pieces behind the front wheels.
The car not only looks fantastic when standing still, but really works to add downforce to the rear of the car while it moves at speed.

One-Piece Molded Chassis

The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

Low Profile Layout Design
One of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.

3S LiPo Capable

The RS4 Sport 3 features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. The speed controller is fitted with an official high-current Dean's Plug, which means you can use use 2S or 3S lithium-polymer batteries, including any of the range of HPI Plazma batteries.

Fits a Wide Variety of Batteries
The RS4 Sport 3 chassis can fit lithium-polymer and nickel-cadmium packs of various sizes, including the extra-long 7-cell Ni-MH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration.

HPI Flux Technology for Ultra-Fast Speeds

What sets apart the RS4 Sport 3 Flux from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The RS4 Sport 3 Flux is fitted with the awesome Flux MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust Flux EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a Deans plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!

Full-Time Four-Wheel Drive

The RS4 Sport 3 features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.

Sealed Shaft Drivetrain

The drivetrain of all the RS4 Sport 3 models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.

Bottom-Access Driveshaft

The central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car.

Option: Carbon Fiber Driveshaft Cover

You can easily replace the stock driveshaft cover on the bottom of the chassis with a carbon fiber cover that provides extra stiffness and extra-cool looks.

Easy Access Differentials

Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service.

4-Gear Metal Diffs

Bevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.

Option: Diff Spool

The optional diff spool removes all diff action for direct traction and braking action from your trigger finger straight to the wheels.

Double-Wishbone Fully Adjustable Suspension

The suspension of the RS4 Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.

Option: Carbon Fiber Shock Towers

The option pair of carbon fiber shock towers not only look amazing, but also adds extra stiffness to the suspension for optimal performance. The carbon fiber material is extra-lightweight which lowers the center of gravity on the RS4 Sport 3 as well.

Oil-Filled Threaded Shocks

The RS4 Sport 3 is fitted with a set composite coilover-style oil-filled shocks, just like what you'd see on a real race car. The fully adjustable shocks are fully tunable to provide the optimum chassis performance on a wide variety of road surfaces. The ride height is quickly adjustable by using the threaded shock collars. Further tuning adjustments are also possible by changing the springs and shock oil weight.

Option: Anodized Aluminum Threaded Shocks

For optimum performance, you'll want a set of anodized aluminum threaded shocks that are machined to perfection. The full anodized aluminum threaded shock body, aluminum shock collar, aluminum top and bottom caps will allow you to make the most precise tuning adjustments.

Tough Front End Suspension

The RS4 Sport front end uses the strong C-hub style suspension seen on the latest RC touring cars, with a vertical ball stud camber mount that lets you change the front end roll center – which is a critical racing adjustment that allows the RS4 Sport 3 to be a step above other sport-level RC touring cars. The suspension arm also features multiple shock mounting holes for easy shock angle adjustment.

Option: Precision Machined Anodized Aluminum Front Pivot Block

The optional set of front precision machined anodized aluminum pivot blocks provide optimum rigidity and suspension performance. The extra rigidity and durability also provides for a more stable and consistent base setup for additional tuning options.

Tunable Rear Suspension

The rear hub is fitted with a vertical ball stud style adjustment that allows easy adjustment of the rear roll center. Moving the ball stud up or down with the optional spacers changes the traction characteristics of the rear end as the car goes through the turns. The suspension arm also features 3 different shock mounting holes for easy shock angle adjustment.

Option: Precision Machined Anodized Aluminum Rear Pivot Block

The optional set of rear precision machined anodized aluminum pivot blocks provide optimum rear end suspension rigidity and performance. The extra rigidity and durability also provides for a more stable and consistent base setup for additional tuning options.

Option: CVD Driveshafts

The optional all in one CVD drive shafts greatly increases the precision and efficiency of the entire driveline and steering for maximum driving performance.

Option: Adjustable Camber Link Turnbuckles

The option set of adjustable turnbuckles will allow you to quickly fine tune the camber setting of your RS4 Sport 3 for optimum performance.

Double Bellcrank Steering

The performance tested adjustable double bell crank system provides optimum steering precision at all speeds. A metal drag link plate connects the cranks for extra durability, the additional drag link mounting positions also allows for Ackermann angle adjustments.

Option: Anodized Aluminum Bellcrank Steering Set

For the ultimate steering performance, upgrade to the precision machined anodized aluminum bellcrank steering set. The included set of adjustable turnbuckles also allow you to change the front end toe angle to further fine tune your desired chassis steering performance.

Rugged Spring-Loaded Servo Saver

The RS4 Sport 3 includes an adjustable multipiece cam-style servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo gears from the impact!

Aluminum Motor Mount

The cast aluminum cam-style motor mount holds the motor in place for a secure pinion/spur connection. Two screws hold the cam firmly in position on the mount, and cooling fins on the lateral support aid heat dissipation to keep the motor running as efficiently as possible.

Option: Machined Anodized Aluminum Motor Mount

The optional billet precision machined anodized aluminum motor mount will provide the most secure mount for your high powered competition motor.

Rear End Chassis Diffuser

The built in rear end chassis diffuser element smooths out the air flow underneath the chassis for maximum aero efficiency.

Metal-Shielded Ball Bearings

The RS4 Sport 3 is fully fitted with a set of metal-shielded ball bearings for maximum efficiency. The metal shields keep the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline.

Rugged Front Bumper

To protect the front suspension chassis and body from impacts big and small

Specifications:

• Length: 431mm (17"")
• Height: 127mm (5"")
• Width: 200mm (7.9"")
• Wheelbase: 254mm (10"")

Includes: 4 AA batteries


Order before 11am, and your item will ship same day (Australia Only)

If your order is coming from more than one location: We suggest you order with Standard Shipping rather than Express (this is due in part to transportation time between stores to get your order combined and sent from 1 location which will delay your "express" postage option).


NOTE - On large mail items (over 1 Metre) Large mail items over 1m will have a delay due to shipping via courier being needed.

Incorrect Delivery Info/Contact Details:
Hearns Hobbies is not held accountable for incorrect delivery/contact information entered in by the user at checkout. Please check your details are correct before submitting your order. If you have entered your details incorrectly when you checked out, please contact us via phone or direct message IMMEDIATELY.

At Hearns Hobbies, we are very efficient with processing orders (meaning your order may already be packed and sorted) so speedy notification is required to allow for immediate intervention in order to change your details.

For more information, or if you are buying Internationally? Feel free to read our Shipping Policy before ordering

Insurance:

It is highly recommended by Hearns Hobbies to opt for additional Insurance or "Extra Cover" to protect your delivery from possible damage or loss on the carriers part. If an item that is not insured is lost/damaged during delivery/transit then the lost item compensation/refund is up to the discretion of the carrier.

Hearns Hobbies offers shipping with Insurance/"Extra Cover", however this option is not applied by default and is at the discretion of the buyer to select upon checkout. Standard shipping DOES NOT include insurance by default.

International Shipping Insurance:

International shipping by default does not come with insurance. Please be aware of this before checking out. If you would like insurance please Contact Us beforehand so we can see what can be organised.

Hearns Hobbies IS NOT responsible for refunding or replacing a damaged/broken items with no insurance.

We CAN NOT ship any dangerous goods internationally, if you place an order for dengerous goods we will have to apply a restocking fee.

Read AUSPOSTS statement on Compensation on damaged goods: https://auspost.com.au/receiving/delayed-lost-or-damaged-items/compensation

Read more about Insurance and refunds on our Refund Policy page: https://www.hearnshobbies.com/policies/refund-policy

What are pre-orders?
Pre-orders, are an order for a product placed before it is available for purchase.

What are back-orders?
Back-Orders allow you to place an order for a product, that is temporarily out of stock.

How much are pre-orders / back-orders?
Prices may vary slighlty (from what was paid on the day of the order). Whilst we try to maintain the lowest possible price, factors such as supplier price and exchange rate fluctuations, could affect the final price when we receive it in store.

Note: Pre-orders could in some cases be a deposit price, without any knowledge of a final price from the Supplier or Manufacturer. In all cases you will be notified if there is a significant price change, from what was originaly paid, before shipping.

How long do I have to wait for my pre-order / back-order?
All orders will be shipped once stock has arrived and full payment has been made, with the exception of Manufacturer Release Dates on some Pre-order Products. Waiting time depends on many factors, which are mostly out of our control. They could be for example, Manufacturing delays (due to global pandemics), Supplier shortages, or shipping delays.

Why am I being charged for my pre-order/back-order, even though the product isn’t released/re-stocked yet?
This is pre-payment for an item's payment and delivery costs that isn’t released yet to ensure as soon as it arrives your order can be fulfilled and sent out to you a.s.a.p. Not all orders will be charged shipping depending on size, and total order amount (see our website for current shipping to find out more and our shipping policy for more information).

Read our full FAQ on Frequently Asked Questions page.

For detailed information on shipping of pre orders please read our Shipping Policy.

For detailed information on returns of pre orders please read our Returns Policy.
HPI 1/10 RS4 SPORT 3 FLUX RTR WITH FALKEN PORSCHE 911 4WD

The RS4 Sport 3 is the all-new touring car chassis from HPI Racing! In development and refined for over a year, the RS4 Sport 3 features a completely sealed and highly efficient shaft drivetrain, coilover shock absorbers plus waterproof electronics. The fully contained drivetrain means there are no exposed gears, belts or drivetrain parts to get stuck with rocks or dirt. Finally, the RS4 Sport 3 is finished with realistic tires plus a licensed replica body and wheels for an authentic look that will grab the attention of all RC and motorsport enthusiasts!

HPI Racing Replica BBS Racing Wheels

The HPI Racing Porsche 911 GT3 RSR RS4 Sport 3 Flux comes properly equipped with matching realistic replica BBS mesh racing wheels. The BBS mesh racing wheels represents the classic standard racing wheel design throughout the GT racing paddock.

HPI Racing Replica Falken Tire Azenis Slick Racing Tires

Wrapped around the replica BBS mesh racing wheel are soft-compound HPI Racing replica Falken Azenis slick racing tires. The 31mm wide front tires and extra wide 35mm extra wide rear tires provides maximum high grip on road performance.

Official Replica of the Legendary Racer

Porsche 911 GT3 RSR was created especially for the 2013 Petit Le Mans 10 hour endurance event at the world famous Road Atlanta racetrack in Braselton, Georgia. Falken Tire in collaboration with FORZA MOTORSPORTS reached out to the racing fans to come up with a unique one-off livery for the iconic endurance event. Beating out all the rest of the submitted liveries was the unique urban camo inspired design which matches the aggressive stance of the RSR perfectly! Assuring the team and its unique livery a permanent place in the record books, the #17 Falken Tire Porsche 911 GT3 RSR proved its mettle by beating out all the other GT class competitors and winning the iconic endurance event!

Realistic Aerodynamic Body Details

The HPI Racing 1/10th scale Falken Tire Porsche 911 GT3 RSR authentically replicates the extensive aerodynamic details of its full scale counterpart with the adjustable replica rear wing, multi piece rear diffuser and side body aero pieces behind the front wheels.
The car not only looks fantastic when standing still, but really works to add downforce to the rear of the car while it moves at speed.

One-Piece Molded Chassis

The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

Low Profile Layout Design
One of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.

3S LiPo Capable

The RS4 Sport 3 features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. The speed controller is fitted with an official high-current Dean's Plug, which means you can use use 2S or 3S lithium-polymer batteries, including any of the range of HPI Plazma batteries.

Fits a Wide Variety of Batteries
The RS4 Sport 3 chassis can fit lithium-polymer and nickel-cadmium packs of various sizes, including the extra-long 7-cell Ni-MH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration.

HPI Flux Technology for Ultra-Fast Speeds

What sets apart the RS4 Sport 3 Flux from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The RS4 Sport 3 Flux is fitted with the awesome Flux MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust Flux EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a Deans plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!

Full-Time Four-Wheel Drive

The RS4 Sport 3 features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.

Sealed Shaft Drivetrain

The drivetrain of all the RS4 Sport 3 models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.

Bottom-Access Driveshaft

The central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car.

Option: Carbon Fiber Driveshaft Cover

You can easily replace the stock driveshaft cover on the bottom of the chassis with a carbon fiber cover that provides extra stiffness and extra-cool looks.

Easy Access Differentials

Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service.

4-Gear Metal Diffs

Bevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.

Option: Diff Spool

The optional diff spool removes all diff action for direct traction and braking action from your trigger finger straight to the wheels.

Double-Wishbone Fully Adjustable Suspension

The suspension of the RS4 Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.

Option: Carbon Fiber Shock Towers

The option pair of carbon fiber shock towers not only look amazing, but also adds extra stiffness to the suspension for optimal performance. The carbon fiber material is extra-lightweight which lowers the center of gravity on the RS4 Sport 3 as well.

Oil-Filled Threaded Shocks

The RS4 Sport 3 is fitted with a set composite coilover-style oil-filled shocks, just like what you'd see on a real race car. The fully adjustable shocks are fully tunable to provide the optimum chassis performance on a wide variety of road surfaces. The ride height is quickly adjustable by using the threaded shock collars. Further tuning adjustments are also possible by changing the springs and shock oil weight.

Option: Anodized Aluminum Threaded Shocks

For optimum performance, you'll want a set of anodized aluminum threaded shocks that are machined to perfection. The full anodized aluminum threaded shock body, aluminum shock collar, aluminum top and bottom caps will allow you to make the most precise tuning adjustments.

Tough Front End Suspension

The RS4 Sport front end uses the strong C-hub style suspension seen on the latest RC touring cars, with a vertical ball stud camber mount that lets you change the front end roll center – which is a critical racing adjustment that allows the RS4 Sport 3 to be a step above other sport-level RC touring cars. The suspension arm also features multiple shock mounting holes for easy shock angle adjustment.

Option: Precision Machined Anodized Aluminum Front Pivot Block

The optional set of front precision machined anodized aluminum pivot blocks provide optimum rigidity and suspension performance. The extra rigidity and durability also provides for a more stable and consistent base setup for additional tuning options.

Tunable Rear Suspension

The rear hub is fitted with a vertical ball stud style adjustment that allows easy adjustment of the rear roll center. Moving the ball stud up or down with the optional spacers changes the traction characteristics of the rear end as the car goes through the turns. The suspension arm also features 3 different shock mounting holes for easy shock angle adjustment.

Option: Precision Machined Anodized Aluminum Rear Pivot Block

The optional set of rear precision machined anodized aluminum pivot blocks provide optimum rear end suspension rigidity and performance. The extra rigidity and durability also provides for a more stable and consistent base setup for additional tuning options.

Option: CVD Driveshafts

The optional all in one CVD drive shafts greatly increases the precision and efficiency of the entire driveline and steering for maximum driving performance.

Option: Adjustable Camber Link Turnbuckles

The option set of adjustable turnbuckles will allow you to quickly fine tune the camber setting of your RS4 Sport 3 for optimum performance.

Double Bellcrank Steering

The performance tested adjustable double bell crank system provides optimum steering precision at all speeds. A metal drag link plate connects the cranks for extra durability, the additional drag link mounting positions also allows for Ackermann angle adjustments.

Option: Anodized Aluminum Bellcrank Steering Set

For the ultimate steering performance, upgrade to the precision machined anodized aluminum bellcrank steering set. The included set of adjustable turnbuckles also allow you to change the front end toe angle to further fine tune your desired chassis steering performance.

Rugged Spring-Loaded Servo Saver

The RS4 Sport 3 includes an adjustable multipiece cam-style servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo gears from the impact!

Aluminum Motor Mount

The cast aluminum cam-style motor mount holds the motor in place for a secure pinion/spur connection. Two screws hold the cam firmly in position on the mount, and cooling fins on the lateral support aid heat dissipation to keep the motor running as efficiently as possible.

Option: Machined Anodized Aluminum Motor Mount

The optional billet precision machined anodized aluminum motor mount will provide the most secure mount for your high powered competition motor.

Rear End Chassis Diffuser

The built in rear end chassis diffuser element smooths out the air flow underneath the chassis for maximum aero efficiency.

Metal-Shielded Ball Bearings

The RS4 Sport 3 is fully fitted with a set of metal-shielded ball bearings for maximum efficiency. The metal shields keep the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline.

Rugged Front Bumper

To protect the front suspension chassis and body from impacts big and small

Specifications:

• Length: 431mm (17"")
• Height: 127mm (5"")
• Width: 200mm (7.9"")
• Wheelbase: 254mm (10"")

Includes: 4 AA batteries


Order before 11am, and your item will ship same day (Australia Only)

If your order is coming from more than one location: We suggest you order with Standard Shipping rather than Express (this is due in part to transportation time between stores to get your order combined and sent from 1 location which will delay your "express" postage option).


NOTE - On large mail items (over 1 Metre) Large mail items over 1m will have a delay due to shipping via courier being needed.

Incorrect Delivery Info/Contact Details:
Hearns Hobbies is not held accountable for incorrect delivery/contact information entered in by the user at checkout. Please check your details are correct before submitting your order. If you have entered your details incorrectly when you checked out, please contact us via phone or direct message IMMEDIATELY.

At Hearns Hobbies, we are very efficient with processing orders (meaning your order may already be packed and sorted) so speedy notification is required to allow for immediate intervention in order to change your details.

For more information, or if you are buying Internationally? Feel free to read our Shipping Policy before ordering

Insurance:

It is highly recommended by Hearns Hobbies to opt for additional Insurance or "Extra Cover" to protect your delivery from possible damage or loss on the carriers part. If an item that is not insured is lost/damaged during delivery/transit then the lost item compensation/refund is up to the discretion of the carrier.

Hearns Hobbies offers shipping with Insurance/"Extra Cover", however this option is not applied by default and is at the discretion of the buyer to select upon checkout. Standard shipping DOES NOT include insurance by default.

International Shipping Insurance:

International shipping by default does not come with insurance. Please be aware of this before checking out. If you would like insurance please Contact Us beforehand so we can see what can be organised.

Hearns Hobbies IS NOT responsible for refunding or replacing a damaged/broken items with no insurance.

We CAN NOT ship any dangerous goods internationally, if you place an order for dengerous goods we will have to apply a restocking fee.

Read AUSPOSTS statement on Compensation on damaged goods: https://auspost.com.au/receiving/delayed-lost-or-damaged-items/compensation

Read more about Insurance and refunds on our Refund Policy page: https://www.hearnshobbies.com/policies/refund-policy

What are pre-orders?
Pre-orders, are an order for a product placed before it is available for purchase.

What are back-orders?
Back-Orders allow you to place an order for a product, that is temporarily out of stock.

How much are pre-orders / back-orders?
Prices may vary slighlty (from what was paid on the day of the order). Whilst we try to maintain the lowest possible price, factors such as supplier price and exchange rate fluctuations, could affect the final price when we receive it in store.

Note: Pre-orders could in some cases be a deposit price, without any knowledge of a final price from the Supplier or Manufacturer. In all cases you will be notified if there is a significant price change, from what was originaly paid, before shipping.

How long do I have to wait for my pre-order / back-order?
All orders will be shipped once stock has arrived and full payment has been made, with the exception of Manufacturer Release Dates on some Pre-order Products. Waiting time depends on many factors, which are mostly out of our control. They could be for example, Manufacturing delays (due to global pandemics), Supplier shortages, or shipping delays.

Why am I being charged for my pre-order/back-order, even though the product isn’t released/re-stocked yet?
This is pre-payment for an item's payment and delivery costs that isn’t released yet to ensure as soon as it arrives your order can be fulfilled and sent out to you a.s.a.p. Not all orders will be charged shipping depending on size, and total order amount (see our website for current shipping to find out more and our shipping policy for more information).

Read our full FAQ on Frequently Asked Questions page.

For detailed information on shipping of pre orders please read our Shipping Policy.

For detailed information on returns of pre orders please read our Returns Policy.

HPI 1/10 RS4 Sport 3 Flux RTR With Falken Porsche 911 4WD

$639.99

Added to cart!
Spend over $100 and receive free shipping within AustraliaAUD Free shipping when you spend XX more You Have Qualified for Free Shipping Open for Click and Collect. Same Day Delivery also available. Please read our Coronavirus Update Page for more details. Updated as of 01/09/21 Spend $x more to get FREE shipping Free Shipping Over $100 to Australia AUD You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping