is here! Shop now, pay later in 4 easy installments
Building and assembling an RC sailboat like the Dragon Force 65 can be a rewarding experience. Here are some essential tips to help you build your DF65 efficiently and effectively, ensuring that it performs well and lasts a long time.
1. Sealing Connectors and Screws: It's crucial to apply super glue to the connectors and stainless steel screws of the DF65. This helps prevent water ingress, which can compromise the integrity and performance of the boat.
2. Waterproofing Rear Connectors: Pay special attention to sealing the rear connectors with super glue. Keeping the boat dry is essential as water inside can negatively affect performance.
3. Siliconing the Black Box: To further prevent water from getting into the boat's internals, consider pulling out the black box and applying silicone around it for an extra layer of protection.
4. Unique Coloring: Personalize your DF65 by adding unique coloring. This not only makes your boat stand out but also helps in easy identification during races or group sailing events.
5. Building a Supportive Stand: Construct a stand with a soft sponge to support the boat's heel. This is important to prevent damage to the boat when it's not in the water.
6. Using Clear Mylar Covers: Clear mylar covers are recommended for their visibility, allowing you to spot any water condensation inside. They also provide increased strength against potential damage.
7. Packing Tape for Maintenance: Utilize cheap packing tape on parts of the boat. This makes for an easy application and removal when conducting maintenance or adjustments.
8. Marking Boom Positions: Mark the boom positions for easy and quick identification. This simplifies the assembly process and ensures consistency.
9. Consistent Setup Measurements: It's beneficial to mark all measurements on the boat. This practice contributes to a consistent setup each time you assemble or adjust your DF65.
10. Battery Position Marking: Mark the position of the battery to align it with the center of the keel. This helps in maintaining the boat's stability.
11. Securing the Keel Bolt: Apply tape to the keel bolt underneath for a clean and secure fitting. This small detail can make a big difference in the boat's performance.
12. Glue Choices for Masts: Avoid using super glue on masts due to its quick setting time. Instead, use araldite for more flexibility and a stronger bond.
13. Checking for Leaks: Before taking your DF65 out for a sail, ensure all parts are securely glued, and there are no leaks. This is a crucial step for the longevity and safety of your boat.
Remember, building an RC sailboat like the DF65 requires patience and attention to detail. Taking the time to carefully follow these tips will pay off when you see your DF65 smoothly sailing across the water. Happy sailing!