Cart
Checkout Secure
Free Shipping Over $100 to Australia AUD

GREEN STUFF WORLD Waterslide Decals - Laser Transparent

GSW8436574505672ES
Your Price:
$25.99
Check in Store Stock:
Quantity
 
Checkout Secure
Checkout Secure

GREEN STUFF WORLD Waterslide Decals - Laser Transparent

Your Price:
$25.99
+ Add To Cart

Or 10 interest free payments from $2.59 with What's this?

Note: ZipPay, Latitude Pay & LayBuy are for online purchases only.

GREEN STUFF WORLD WATERSLIDE DECALS - LASER TRANSPARENT

Print your own waterslide decals with this set of 5 sheets of printable decal paper. Decals are to be applied with water, no solvent required. You can also use some GSW Decal Softener and GSW Decal Fixer solutions to improve and protect the finish on uneven or rough surfaces.

Use a computer to create your artwork, because copiers and printers cannot print white, they rely on the paper itself to supply the white component in lettering and artwork. To make a decal with white lettering and/or artwork, you would start with white film decal paper.

Choose the proper type of paper according to your printer type, inkjet paper or laser paper. Remove any tissue-type sheet protector that may be present in the printable paper, and print that artwork directly onto the glossy side of the decal paper. For inkjet printing, we recommend using the "Transparency Plastic Film" (or foils) setting if your printer software supports this option. In all cases, you must immediately apply a few thin, but thorough, coats of fixative spray (either acrylic or lacquer) to seal the printed image on the decal paper that will prevent ink from smearing, washing off, cracking or chipping during application.

Sheets: 5 per package
Size: 210 x 270mm (A4)

BASIC INSTRUCTIONS
1.- Cut the decal out as close as you can to the outer edge of the image. For better results, use a brand new blade in your cutter.
2.- Pick the decal up with your tweezers and let your decal soak in water for about 20 seconds. Warm water may help with this process.
3.- Use a paintbrush to gently push the decal off the sheet and onto the model. That's all folks!

ADVANCED INSTRUCTIONS
4.- Before applying it to the model, once the decal has soaked long enough, apply a bit of GSW Decal Fixer to the surface of the model where you are planning to set your decal. GSW Decal Fixer protects the paint beneath and smooths the surface, thereby helping to prevent silvering. Use a paintbrush to gently push the decal off the sheet and onto the model. If it is hard to move the decal around, adding bit more GSW Decal Fixer or water will help the decal float on the surface until it is positioned correctly.
5.- If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.
Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.
6.- Finally apply GSW Decal Fixer again to the decal and the surface of the model where we have been working to unify the surface. Coat it as normal with matt or gloss varnish if you consider it necessary to remove or add a glossy finish.


Order before 11am, and your item will ship same day (Australia Only)

If your order is coming from more than one location: We suggest you order with Standard Shipping rather than Express (this is due in part to transportation time between stores to get your order combined and sent from 1 location which will delay your "express" postage option).


NOTE - On large mail items (over 1 Metre) Large mail items over 1m will have a delay due to shipping via courier being needed. Please note additional smaller items may incur an additional shipping fee.

Incorrect Delivery Info/Contact Details:
Hearns Hobbies is not held accountable for incorrect delivery/contact information entered in by the user at checkout. Please check your details are correct before submitting your order. If you have entered your details incorrectly when you checked out, please contact us via phone or direct message IMMEDIATELY.

At Hearns Hobbies, we are very efficient with processing orders (meaning your order may already be packed and sorted) so speedy notification is required to allow for immediate intervention in order to change your details.

For more information, or if you are buying Internationally? Feel free to read our Shipping Policy before ordering

Insurance:

It is highly recommended by Hearns Hobbies to opt for additional Insurance or "Extra Cover" to protect your delivery from possible damage or loss on the carriers part. If an item that is not insured is lost/damaged during delivery/transit then the lost item compensation/refund is up to the discretion of the carrier.

Hearns Hobbies offers shipping with Insurance/"Extra Cover", however this option is not applied by default and is at the discretion of the buyer to select upon checkout. Standard shipping DOES NOT include insurance by default.

International Shipping Insurance:

International shipping by default does not come with insurance. Please be aware of this before checking out. If you would like insurance please Contact Us beforehand so we can see what can be organised.

Hearns Hobbies IS NOT responsible for refunding or replacing a damaged/broken items with no insurance.

Read AUSPOSTS statement on Compensation on damaged goods: https://auspost.com.au/receiving/delayed-lost-or-damaged-items/compensation

Read more about Insurance and refunds on our Refund Policy page: https://www.hearnshobbies.com/policies/refund-policy

What are pre-orders?
Pre-orders are as the name suggests, placing an advanced pre-release order on an item. This means that the order you are placing is for the future release of a product that has yet to be released, or re-stocked.

How much are pre-orders?
Pre-order prices are defined at the time based off what we initially received from the manufacturer. This means that when we receive the product (to send to you), manufacturing costs, taxes, and even economic shifts in the country of the manufacturer, could affect the final price when we receive it in store. So, we suggest you use the price shown only as a point of reference, as it may not be derivative of the final price when it is received and ready to be sent to you.

How long do I have to wait for my pre-order?
The wait time depends on the release date of the pre-order product, and the time you placed your order. Pre-order release times also vary per product, per manufacturer, transportation and many other factors. If a release date is given from the manufacturer, please note that this is still subjective due to circumstances out of our control, and this isn’t indicative of our in-store stock date this could be a day or two after the release date.

Why am I being charged for my pre-order, even though the product isnt released yet?
This is pre-payment for an item's payment and delivery costs that isn’t released yet (pre-order) to ensure as soon as it arrives your order can be fulfilled and sent out to you a.s.a.p. Not all orders will be charged shipping depending on size, and total order amount (see our website for current shipping to find out more and our shipping policy for more information).

Read our full FAQ on Frequently Asked Questions page.

For detailed information on shipping of pre orders please read our Shipping Policy.

For detailed information on returns of pre orders please read our Returns Policy.
GREEN STUFF WORLD WATERSLIDE DECALS - LASER TRANSPARENT

Print your own waterslide decals with this set of 5 sheets of printable decal paper. Decals are to be applied with water, no solvent required. You can also use some GSW Decal Softener and GSW Decal Fixer solutions to improve and protect the finish on uneven or rough surfaces.

Use a computer to create your artwork, because copiers and printers cannot print white, they rely on the paper itself to supply the white component in lettering and artwork. To make a decal with white lettering and/or artwork, you would start with white film decal paper.

Choose the proper type of paper according to your printer type, inkjet paper or laser paper. Remove any tissue-type sheet protector that may be present in the printable paper, and print that artwork directly onto the glossy side of the decal paper. For inkjet printing, we recommend using the "Transparency Plastic Film" (or foils) setting if your printer software supports this option. In all cases, you must immediately apply a few thin, but thorough, coats of fixative spray (either acrylic or lacquer) to seal the printed image on the decal paper that will prevent ink from smearing, washing off, cracking or chipping during application.

Sheets: 5 per package
Size: 210 x 270mm (A4)

BASIC INSTRUCTIONS
1.- Cut the decal out as close as you can to the outer edge of the image. For better results, use a brand new blade in your cutter.
2.- Pick the decal up with your tweezers and let your decal soak in water for about 20 seconds. Warm water may help with this process.
3.- Use a paintbrush to gently push the decal off the sheet and onto the model. That's all folks!

ADVANCED INSTRUCTIONS
4.- Before applying it to the model, once the decal has soaked long enough, apply a bit of GSW Decal Fixer to the surface of the model where you are planning to set your decal. GSW Decal Fixer protects the paint beneath and smooths the surface, thereby helping to prevent silvering. Use a paintbrush to gently push the decal off the sheet and onto the model. If it is hard to move the decal around, adding bit more GSW Decal Fixer or water will help the decal float on the surface until it is positioned correctly.
5.- If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.
Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.
6.- Finally apply GSW Decal Fixer again to the decal and the surface of the model where we have been working to unify the surface. Coat it as normal with matt or gloss varnish if you consider it necessary to remove or add a glossy finish.


Order before 11am, and your item will ship same day (Australia Only)

If your order is coming from more than one location: We suggest you order with Standard Shipping rather than Express (this is due in part to transportation time between stores to get your order combined and sent from 1 location which will delay your "express" postage option).


NOTE - On large mail items (over 1 Metre) Large mail items over 1m will have a delay due to shipping via courier being needed. Please note additional smaller items may incur an additional shipping fee.

Incorrect Delivery Info/Contact Details:
Hearns Hobbies is not held accountable for incorrect delivery/contact information entered in by the user at checkout. Please check your details are correct before submitting your order. If you have entered your details incorrectly when you checked out, please contact us via phone or direct message IMMEDIATELY.

At Hearns Hobbies, we are very efficient with processing orders (meaning your order may already be packed and sorted) so speedy notification is required to allow for immediate intervention in order to change your details.

For more information, or if you are buying Internationally? Feel free to read our Shipping Policy before ordering

Insurance:

It is highly recommended by Hearns Hobbies to opt for additional Insurance or "Extra Cover" to protect your delivery from possible damage or loss on the carriers part. If an item that is not insured is lost/damaged during delivery/transit then the lost item compensation/refund is up to the discretion of the carrier.

Hearns Hobbies offers shipping with Insurance/"Extra Cover", however this option is not applied by default and is at the discretion of the buyer to select upon checkout. Standard shipping DOES NOT include insurance by default.

International Shipping Insurance:

International shipping by default does not come with insurance. Please be aware of this before checking out. If you would like insurance please Contact Us beforehand so we can see what can be organised.

Hearns Hobbies IS NOT responsible for refunding or replacing a damaged/broken items with no insurance.

Read AUSPOSTS statement on Compensation on damaged goods: https://auspost.com.au/receiving/delayed-lost-or-damaged-items/compensation

Read more about Insurance and refunds on our Refund Policy page: https://www.hearnshobbies.com/policies/refund-policy

What are pre-orders?
Pre-orders are as the name suggests, placing an advanced pre-release order on an item. This means that the order you are placing is for the future release of a product that has yet to be released, or re-stocked.

How much are pre-orders?
Pre-order prices are defined at the time based off what we initially received from the manufacturer. This means that when we receive the product (to send to you), manufacturing costs, taxes, and even economic shifts in the country of the manufacturer, could affect the final price when we receive it in store. So, we suggest you use the price shown only as a point of reference, as it may not be derivative of the final price when it is received and ready to be sent to you.

How long do I have to wait for my pre-order?
The wait time depends on the release date of the pre-order product, and the time you placed your order. Pre-order release times also vary per product, per manufacturer, transportation and many other factors. If a release date is given from the manufacturer, please note that this is still subjective due to circumstances out of our control, and this isn’t indicative of our in-store stock date this could be a day or two after the release date.

Why am I being charged for my pre-order, even though the product isnt released yet?
This is pre-payment for an item's payment and delivery costs that isn’t released yet (pre-order) to ensure as soon as it arrives your order can be fulfilled and sent out to you a.s.a.p. Not all orders will be charged shipping depending on size, and total order amount (see our website for current shipping to find out more and our shipping policy for more information).

Read our full FAQ on Frequently Asked Questions page.

For detailed information on shipping of pre orders please read our Shipping Policy.

For detailed information on returns of pre orders please read our Returns Policy.

GREEN STUFF WORLD Waterslide Decals - Laser Transparent

$25.99

Added to cart!

Signup to our newsletter before Saturday

To take advantage of our - WEEKEND DISCOUNT - Newsletter exclusive discount, and other promotions in the future!

Spend over $100 and receive free shipping within AustraliaAUD Free shipping when you spend XX more You Have Qualified for Free Shipping We are currently trading as normal *Please read our Coronavirus Update Page for more details. Updated as of 18/02/21 Spend $x more to get FREE shipping Free Shipping Over $100 to Australia AUD You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping

Or 6 weekly interest free payments from $4.33 with what's this?

x