{"title":"DCC Systems \u0026 Decoders","description":"\u003cp\u003eHearns Hobbies stocks a wide selection of DCC Systems \u0026amp; Decoders that include products from such brands as: NCE, TCS, \u003ca title=\"DCC Concepts\" href=\"https:\/\/www.hearnshobbies.com\/collections\/dcc-concepts\"\u003eDCC Concepts\u003c\/a\u003e, Bachmann, Hornby, and more!.\u003c\/p\u003e","products":[{"product_id":"nce-powercab-digital-controller","title":"NCE POWERCAB Digital Controller DCC System","description":"\u003cp data-start=\"163\" data-end=\"234\"\u003e\u003cstrong data-start=\"163\" data-end=\"232\"\u003eNCE Power Cab DCC System – Complete 2-Amp Digital Command Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-start=\"236\" data-end=\"563\"\u003eThe Power Cab by NCE (North Coast Engineering) is a complete high-quality 2-Amp DCC system built right into a compact hand-held throttle. With nothing extra required to get started, you can power up your layout straight out of the box – simply connect two wires to the track, plug in the cab, and you’re ready to run.\u003c\/p\u003e\u003cp data-start=\"565\" data-end=\"984\"\u003eDespite its small size, the Power Cab offers the full capability of the NCE Power Pro system at an entry-level price. Operate locomotives, lights, and sound decoders with ease, and take advantage of its dedicated programming track function for advanced setup. Plus, when connected to a larger NCE system, the Power Cab functions as a Deluxe Pro Cab throttle, making it a system that grows with your hobby.\u003c\/p\u003e\u003ch3 data-start=\"986\" data-end=\"1008\"\u003eWhat’s Included:\u003c\/h3\u003e\u003cul data-start=\"1009\" data-end=\"1154\"\u003e\n\u003cli data-start=\"1009\" data-end=\"1042\"\u003e\u003cp data-start=\"1011\" data-end=\"1042\"\u003ePower Cab with v1.65 firmware\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1043\" data-end=\"1067\"\u003e\u003cp data-start=\"1045\" data-end=\"1067\"\u003e7 ft Power Cab cable\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1068\" data-end=\"1087\"\u003e\u003cp data-start=\"1070\" data-end=\"1087\"\u003ePCP Power Panel\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1088\" data-end=\"1114\"\u003e\u003cp data-start=\"1090\" data-end=\"1114\"\u003eRegulated Power Supply\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1115\" data-end=\"1138\"\u003e\u003cp data-start=\"1117\" data-end=\"1138\"\u003ePro Cab Coiled Cord\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1139\" data-end=\"1154\"\u003e\u003cp data-start=\"1141\" data-end=\"1154\"\u003eUser Manual\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 data-start=\"1156\" data-end=\"1192\"\u003eKey Features \u0026amp; Specifications:\u003c\/h3\u003e\u003cul data-start=\"1193\" data-end=\"1835\"\u003e\n\u003cli data-start=\"1193\" data-end=\"1259\"\u003e\u003cp data-start=\"1195\" data-end=\"1259\"\u003e\u003cstrong data-start=\"1195\" data-end=\"1211\"\u003eTrack Power:\u003c\/strong\u003e 2 Amps peak output (input voltage minus 0.5V)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1260\" data-end=\"1345\"\u003e\u003cp data-start=\"1262\" data-end=\"1345\"\u003e\u003cstrong data-start=\"1262\" data-end=\"1278\"\u003eInput Power:\u003c\/strong\u003e 10–15V regulated DC, 3A max (5.5mm x 2.5mm center positive plug)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1346\" data-end=\"1394\"\u003e\u003cp data-start=\"1348\" data-end=\"1394\"\u003e\u003cstrong data-start=\"1348\" data-end=\"1364\"\u003eLocomotives:\u003c\/strong\u003e Run up to 12 trains at once\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1395\" data-end=\"1472\"\u003e\u003cp data-start=\"1397\" data-end=\"1472\"\u003e\u003cstrong data-start=\"1397\" data-end=\"1412\"\u003eConsisting:\u003c\/strong\u003e 16 advanced consists (unlimited locos) + 4 basic consists\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1473\" data-end=\"1552\"\u003e\u003cp data-start=\"1475\" data-end=\"1552\"\u003e\u003cstrong data-start=\"1475\" data-end=\"1489\"\u003eAddresses:\u003c\/strong\u003e Locos 0–9999, Consists 112–127, Accessories \u0026amp; Signals 1–2044\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1553\" data-end=\"1615\"\u003e\u003cp data-start=\"1555\" data-end=\"1615\"\u003e\u003cstrong data-start=\"1555\" data-end=\"1567\"\u003eRecalls:\u003c\/strong\u003e 2 to 6 locomotive recalls for quick switching\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1616\" data-end=\"1694\"\u003e\u003cp data-start=\"1618\" data-end=\"1694\"\u003e\u003cstrong data-start=\"1618\" data-end=\"1633\"\u003eExpandable:\u003c\/strong\u003e Supports up to 2 cabs plus USB interface and\/or Mini Panel\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1695\" data-end=\"1753\"\u003e\u003cp data-start=\"1697\" data-end=\"1753\"\u003e\u003cstrong data-start=\"1697\" data-end=\"1718\"\u003eComputer Control:\u003c\/strong\u003e Optional USB interface available\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1754\" data-end=\"1835\"\u003e\u003cp data-start=\"1756\" data-end=\"1835\"\u003e\u003cstrong data-start=\"1756\" data-end=\"1777\"\u003eBuilt-in Ammeter:\u003c\/strong\u003e Monitor current draw to know if\/when you need a booster\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 data-start=\"1837\" data-end=\"1862\"\u003eUpgrade as You Grow\u003c\/h3\u003e\u003cp data-start=\"1863\" data-end=\"2111\"\u003eThe Power Cab is designed to expand with your layout. Add a booster for more power, a USB interface for computer control, or a separate programming track when you’re ready. If you don’t need these extras, you never pay for features you won’t use.\u003c\/p\u003e\u003ch3 data-start=\"2113\" data-end=\"2144\"\u003eWhy Choose the Power Cab?\u003c\/h3\u003e\u003cul data-start=\"2145\" data-end=\"2452\"\u003e\n\u003cli data-start=\"2145\" data-end=\"2208\"\u003e\u003cp data-start=\"2147\" data-end=\"2208\"\u003eA \u003cstrong data-start=\"2149\" data-end=\"2180\"\u003ecomplete DCC starter system\u003c\/strong\u003e in one hand-held throttle\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"2209\" data-end=\"2273\"\u003e\u003cp data-start=\"2211\" data-end=\"2273\"\u003e\u003cstrong data-start=\"2211\" data-end=\"2254\"\u003eFull-featured programming track support\u003c\/strong\u003e – no compromises\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"2274\" data-end=\"2327\"\u003e\u003cp data-start=\"2276\" data-end=\"2327\"\u003e\u003cstrong data-start=\"2276\" data-end=\"2292\"\u003eSimple setup\u003c\/strong\u003e with just two wires to the track\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"2328\" data-end=\"2381\"\u003e\u003cp data-start=\"2330\" data-end=\"2381\"\u003e\u003cstrong data-start=\"2330\" data-end=\"2358\"\u003eUpgradeable and flexible\u003c\/strong\u003e as your layout grows\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"2382\" data-end=\"2452\"\u003e\u003cp data-start=\"2384\" data-end=\"2452\"\u003eWidely supported, with a strong user community for help and advice\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-start=\"2454\" data-end=\"2627\"\u003eWhether you’re just starting out in DCC or want a portable system for a second layout, the NCE Power Cab delivers the performance, reliability, and expandability you need.\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default Title","offer_id":37714072895649,"sku":"NCE-05240025","price":449.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/NCEpcab.jpg?v=1735333679"},{"product_id":"nce-ph-pro-5am-with-power-cab","title":"NCE PH-PRO 5AMP WITH POWER CAB","description":"\u003cp style=\"color: rgb(51, 51, 51); font-family: tahoma, geneva, verdana, sans-serif; font-size: 14px; background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"position: static; margin: 0px; padding: 0px; border: none; outline: none; z-index: auto; font-size: 10\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default","offer_id":11460923333,"sku":"PH-PRO-R","price":1299.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/NCE-0235293605_186403a8-7bf2-4160-88f2-21fcc622e5e7.jpg?v=1722444719"},{"product_id":"dcc-concepts-cobalt-alpha-switch-y-connectors-3-pk","title":"DCC CONCEPTS Cobalt Alpha Switch Y-Connectors (3 PK)","description":"DCC CONCEPTS COBALT ALPHA SWITCH Y-CONNECTORS (3 PK) \u003cp\u003eNeed to parallel 2 or more Alpha-Switches or perhaps have one switch control two devices?\u003c\/p\u003e\u003cp\u003eEven this is no problem… this “2 into 1” Y adapter PCB takes two switches one side, one on the other, allowing you to just plug them together – no wire cutting, stripping or soldering at all!\u003c\/p\u003e\u003cp\u003eEach pack includes 3 Y connectors at a very low cost!\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":20364166853,"sku":"DCD-SY3","price":11.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-SY3.jpg?v=1740747989"},{"product_id":"dcc-concepts-cobalt-classic","title":"DCC CONCEPTS Cobalt Classic Analog (Single Pack)","description":"DCC CONCEPTS COBALT CLASSIC One Cobalt Classic O Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads.Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools!We recommend that you use a regulated DC power supply between 9 and 12V DC, although we do understand that some systems for larger scales have higher accessory voltage power supplies and that DCC accessory decoders may have higher output voltages. For this we’ve added a simple “voltage range change” switch to the Cobalt Classic O. This allows it to accept two power input ranges, 6~12V or 12~18V.The Cobalt O is supplied with the throw bar already centred for easy installation and it has three “break before make” changeover switches. One is a low power SPDT switch linked to the Cobalt O drive power directly to allow easy connection of low current lighting (for example panels or signals) or for linking to your computer or system control to report turnout position. The other two are super high power SPDT switches suitable for up to 5 amps continuous power handling and so are usable for frog polarity, interlocking or many similar applications.Because Cobalt Classic O Turnout Motors are switched with reversing DC power, the LEDs for control panel indication can simply be put in-line with power leads! You can then use all the switching for other layout needs.You can also have it both ways with the Cobalt O. Just add digital control with our Cobalt accessory decoders and still retain the ability for both conventional control panel as well as DCC or computer control at any time!All of this – with a lifetime warranty!Product Size:Width 28.5mm (67mm over the mounting wings)Depth 40mm (48mm over the mounting wings)Height 44mm (67mm over the connector)","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":25061689232,"sku":"DCP-CB1OMEGA","price":26.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCP-CB1_CE_A9-connector1-w.png?v=1750044561"},{"product_id":"dcc-concepts-cobalt-ip-digital","title":"DCC CONCEPTS Cobalt iP Digital (single pack)","description":"Cobalt iP Analog “Intelligent Power” Turnout Motor","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":25061691344,"sku":"DCP-CB1DIP","price":50.4,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCP-CB1DIP.jpg?v=1735595734"},{"product_id":"dcc-concepts-zen-nano-8-pin-wired-2-function-w-stay-alive","title":"DCC CONCEPTS Zen NANO 8 Pin Wired 2 Function","description":"DCC CONCEPTS Zen NANO 8 Pin Wired 2 Function w\/Stay Alive\u003cp\u003eZen NANO 8 Pin Wired 2 Function w\/Stay Alive connection.\u003c\/p\u003e\u003cp\u003eThe ZN8H.nano is remarkably small! We started off with the world’s smallest, then shrunk it even more! With the same footprint as NANO 8-pin direct, we added wires… and shrunk it in thickness by nearly 50% to create a super-small go-anywhere wired decoder.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 2 functions at 100mA each\u003cbr\u003e– 14mm x 7mm x 2.7mm\u003cbr\u003e– 8-pin harness\u003cbr\u003e– Brown-out protection\u003cbr\u003e– Stay-alive connection\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37713790402721,"sku":"DCD-ZN8H.NANO","price":49.6,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZN8H-2-scaled.jpg?v=1734699717"},{"product_id":"dcc-concepts-cobalt-ip-digital-12-pack","title":"DCC CONCEPTS Cobalt IP Digital (12 Pack)","description":"DCC CONCEPTS Cobalt IP Digital (12 Pack)","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37713113153697,"sku":"DCP-CB12DIP","price":504.85,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCP-CB12DIP_d8689d88-99b3-42b2-8d2f-40761f2de867.jpg?v=1736232695"},{"product_id":"dcc-concepts-x2-cobalt-ss-w-controller-accessories-dcp-cbss-2","title":"DCC CONCEPTS x2 Cobalt SS w\/Controller \u0026 Accessories (DCP-C","description":"DCC CONCEPTS x2 Cobalt SS w\/Controller \u0026amp; Accessories \u003cp\u003e Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with “Plug \u0026amp; Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC, conventional switches or both.The pack also contains the following accessory leads and accessories:1x Cobalt-SS Extension Cable (600mm) to enable one motor to be mounted further away from the Control Board.1x Cobalt-SS Y-connection or reverse connection cable to enable two motors to be connected to one output on the Control Board.Linkage pack – to connect your Cobalt-SS motor to your turnout.Mounting screws – to install both the Cobalt-SS motors and the control boards.Motor Size:Width 27mmDepth 14mmHeight 11mmControl Board Size:Width 115mmDepth 60mmHeight 25mm\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":42611531024,"sku":"DCP-CBSS-2","price":83.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCP-CBSS-2.png?v=1736974841"},{"product_id":"dcc-concepts-accessory-decoder-cdu-solanoid-drive-sx-8-way-w-power-off-memory-protective-case-dcd-ads-8sx","title":"DCC CONCEPTS Accessory Decoder CDU Solanoid Drive SX 8-Way","description":"DCC CONCEPTS Accessory Decoder CDU Solanoid Drive SX 8-Way w\/Power-Off Memory \u0026amp; Protective Case (DCD-ADS-8SX)","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":3850846339101,"sku":"DCD-ADS-8SX","price":137.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ADS-8SX.png?v=1746304219"},{"product_id":"nce-usb-interface-nce-usb","title":"NCE USB Interface","description":"NCE USB Interface (NCE-USB)","brand":"NCE","offers":[{"title":"Default","offer_id":4536203182109,"sku":"NCE-USB","price":129.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/usb_interface_4a027dc9642be_1f8153a0-af72-4a5d-9f0c-0fd39fa82beb.jpg?v=1734943558"},{"product_id":"dcc-concepts-motive-power-depot-drive-on-off-storage-460mm-mpd-460","title":"DCC CONCEPTS Motive Power Depot Drive On\/Off Storage 460mm","description":"\u003cp\u003eDCC CONCEPTS Motive Power Depot Drive On\/Off Storage 460mm (MPD-460)\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":5133305151517,"sku":"MPD-460","price":109.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/MPD-460_af380b9a-09bb-4e5c-bdd4-5b50cee66a65.jpg?v=1734699717"},{"product_id":"nce-throttle-pocket-nce-tpkt","title":"NCE Throttle Pocket","description":"NCE Throttle Pocket","brand":"NCE","offers":[{"title":"Default","offer_id":5604364877853,"sku":"NCE-TPKT","price":22.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/s-l400_0469b960-73c0-4380-9e5f-f1f858f54a68.jpg?v=1746044107"},{"product_id":"nce-power-cab-panel-nce-pcp","title":"NCE Power Cab Panel","description":"NCE Power Cab Panel\u003cp\u003eThis panel allows another location that you can plug in your Power Cab.\u003c\/p\u003e\u003cp\u003ePower Cab connection panel has jacks on rear for track output and power input from the P114 power supply. The Power Cab plugs in on the front in the LEFT side with the flat cable.\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default","offer_id":8670649417818,"sku":"NCE-PCP","price":64.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/1710455108.jpg?v=1744323551"},{"product_id":"kato-n-decoder-for-gs4-em13dcc-ka29-351","title":"KATO N DECODER FOR (GS4) EM13DCC (KA29-351)","description":"KATO N DECODER FOR (GS4) EM13DCC (KA29-351). . .","brand":"KATO","offers":[{"title":"Default","offer_id":12373472116826,"sku":"KA29-351","price":49.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/ka29-351.jpg?v=1744321933"},{"product_id":"kato-decoder-for-end-car-lights-ka29-352","title":"KATO Decoder for End Car Lights","description":"KATO DECODER FOR END CAR LIGHTS","brand":"KATO","offers":[{"title":"Default","offer_id":12373472149594,"sku":"KA29-352A","price":79.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/ka29-352.jpg?v=1741098231"},{"product_id":"model-rectifier-corp-dcdr-unv-stm-w-hrns-fq-a-500-1030","title":"MRC Steam Decoder with Remote","description":"MRC STEAM DECODER WITH REMOTE","brand":"MODEL RECTIFIER CORP","offers":[{"title":"Default Title","offer_id":37713250943137,"sku":"500-1030","price":187.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/4009173_11f8c5e0-9822-4eec-baed-626460c6abe5.jpg?v=1722691936"},{"product_id":"dcc-concepts-cobalt-turnout-motor-installation-template-dcw-tmp2","title":"DCC CONCEPTS Cobalt Turnout Motor Installation Template","description":"DCC CONCEPTS Cobalt Turnout Motor Installation Template","brand":"DCC CONCEPTS","offers":[{"title":"Default","offer_id":16472595693658,"sku":"DCW-TMP2","price":16.45,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCW-TMP2.jpg?v=1722699390"},{"product_id":"hornby-standard-6-pin-decoder-69-r7150","title":"HORNBY Digital 2 Function Locomotive Decoder with NEM 651,","description":"HORNBY STANDARD 6 PIN DECODER. OO SCALE.\u003cp\u003eThe Standard 6 pin Decoder measures at 18mm in length and comes complete with wires shown.\u003c\/p\u003e","brand":"HORNBY","offers":[{"title":"Default","offer_id":16733855613018,"sku":"HRB-R7150","price":63.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/69-R7150-1000x1000.jpg?v=1735046556"},{"product_id":"dcc-concepts-nem652-8-pin-jst-harness-for-zn218-decoders-3-pack-dcd-hz218-3","title":"DCC CONCEPTS NEM652 8 Pin JST Harness (For ZN218 Decoders)","description":"DCC CONCEPTS NEM652 8 Pin JST Harness (For ZN218 Decoders) (3 Pack) (DCD-HZ218.3)\u003cp\u003eA pack of three NEM652 8 pin to JST replacement harnesses for DCCconcepts ZNmini.4 decoder.\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":17748641808474,"sku":"DCD-HZ218.3","price":19.49,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-HZ218.3-content-w.jpg?v=1736426538"},{"product_id":"dcc-concepts-zen-black-21-pin-w-8-pin-adaptor-6-function","title":"DCC CONCEPTS Zen Black 21 Pin w\/ 8 Pin Adaptor 6 Function","description":"DCC CONCEPTS Zen Black 21 Pin w\/ 8 Pin Adaptor 6 Function\u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003eDCD-ZN218.6 replaces the previous version – DCD-Z218.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 6 functions at 100mA each\u003cbr\u003e– 22mm x 16.5mm\u003cbr\u003e– 21-pin direct, 8-pin \u0026amp; harness\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003cbr\u003e– Stay-Alive connection\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":30860872679514,"sku":"DCD-ZN218.6","price":42.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZN218.6.jpg?v=1734931554"},{"product_id":"dcc-concepts-zen-mini-8-pin-harness-4-function-decoder","title":"DCC CONCEPTS Zen Mini 8 Pin Harness 4 Function Decoder","description":"DCC CONCEPTS Zen Mini 8 Pin Harness 4 Function Decoder","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":30860873236570,"sku":"DCD-ZNMINI","price":59.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZMINI_68b3d6cd-328d-4eda-9ed5-2f9369737227.jpg?v=1744320134"},{"product_id":"block-occupancy-detector","title":"CIRCUITRON BD-1 Optical Detector","description":"CIRCUITRON, BLOCK OCCUPANCY DETECTOR (CT800-5501)","brand":"CIRCUITRON","offers":[{"title":"Default Title","offer_id":31946748624986,"sku":"CT800-5501","price":57.41,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/bd-1_optical_detector_800-5501_f7b5d562-8fd8-4c4d-b042-5b75782b9559.gif?v=1722257092"},{"product_id":"alternating-flasher-3-output","title":"CIRCUITRON Alternating Flasher 3 Output","description":"CIRCUITRON, ALTERNATING FLASHER 3 OUTPUT","brand":"CIRCUITRON","offers":[{"title":"Default Title","offer_id":31946749476954,"sku":"CT800-5103","price":47.96,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/3307240.jpg?v=1722029755"},{"product_id":"resistor12v-in1-5v-globemedium-out","title":"CIRCUITRON Resistor(12V,IN)(1.5V,Globe)(Medium Out)","description":"CIRCUITRON RESISTOR(12V,IN)(1.5V,GLOBE)(MEDIUM OUT)","brand":"CIRCUITRON","offers":[{"title":"Default Title","offer_id":31946750132314,"sku":"800-941412","price":2.12,"currency_code":"AUD","in_stock":true}]},{"product_id":"1-4mm-1-5v-clear-globe","title":"CIRCUITRON Mitey Lites 1.4mm 1.5V Clear Globe","description":"CIRCUITRON, 1.4MM 1.5V CLEAR GLOBE","brand":"CIRCUITRON","offers":[{"title":"Default Title","offer_id":31946751115354,"sku":"800-741412","price":1.48,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/s-l300_7b64280f-157e-48f8-8a56-8eedc6250e65.jpg?v=1722029954"},{"product_id":"coilcordrj-a-7-foot-coiled-cable-for-c","title":"NCE CoilcordRJ - A 6 Foot Coiled Cable For Cabs","description":"NCE  COILCORDRJ - A 7 FOOT COILED CABLE FOR CABS\u003cp\u003eA 7 foot four wire coiled cable for cabs. Has RJ12 connectors on both ends.\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default Title","offer_id":32009354608730,"sku":"NCE524-0209","price":25.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/980620733.jpg?v=1722263108"},{"product_id":"bachmann-plux22-loco-decoder","title":"BACHMANN PLUX22 Loco-Decoder","description":"BACHMANN PLUX22 LOCO-DECODER\u003cp\u003eA Plux22 (NEM658) DCC Decoder suitable for models fitted with a Plux22 DCC decoder socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003c\/p\u003e\u003cp\u003e9 powered function outputs (+2 servo or SUSI or logic level outputs)\u003c\/p\u003e\u003cp\u003e1.2A continuous load\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003c\/p\u003e\u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e1.2A continuous load\u003c\/p\u003e\u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e9 powered-function outputs with overload protection\u003c\/p\u003e\u003cp\u003e800mA load per output\u003c\/p\u003e\u003cp\u003e800mA total load of all function outputs\u003c\/p\u003e\u003cp\u003e2 additional servo or SUSI or logic level outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e22mm x 15mm x 3.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom® Feedback system\u003c\/p\u003e\u003cp\u003eCapacitor connections\u003c\/p\u003e\u003cp\u003eUpgradable firmware\u003c\/p\u003e","brand":"BACHMANN","offers":[{"title":"Default Title","offer_id":32022737354842,"sku":"36-570B","price":89.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/4533-extra-large.jpg?v=1741097384"},{"product_id":"bachmann-6-pin-dcc-loco-decoder-with-back-emf-featuring-rai","title":"BACHMANN 6 Pin DCC Loco-Decoder With Back EMF featuring Railcom","description":"BACHMANN 6 PIN DCC LOCO-DECODER WITH BACK EMF FEATURING RAILCOM\u003cp\u003eA 6 Pin (NEM651) DCC Decoder suitable for models fitted with a 6 Pin DCC decoder socket (do not use with the Graham Farish 3F ‘Jinty’ and Class 64XX Pannier Tank – use 36-556RA with these models).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003c\/p\u003e\u003cp\u003e4 powered function outputs (+2 logic level\/SUSI outputs)\u003c\/p\u003e\u003cp\u003e0.8A continuous load\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003eBrake Button function for realistic control of braking (operates on F2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMulti-mode (NMRA-DCC format, Motorola protocol, DC Analogue and AC Analogue (Marklin) with Back EMF function\u003c\/p\u003e\u003cp\u003e14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuitable for models equipped with DC motors (including coreless motors)\u003c\/p\u003e\u003cp\u003e0.8A continuous load\u003c\/p\u003e\u003cp\u003eVariable pulse width frequency motor regulation (up to 40kHz)\u003c\/p\u003e\u003cp\u003eMotor output overload protection; Back EMF (de-selectable)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e4 powered-function outputs with overload protection (2 outputs connect via solder pads)\u003c\/p\u003e\u003cp\u003e500mA load per output\u003c\/p\u003e\u003cp\u003e500mA total load of all function outputs\u003c\/p\u003e\u003cp\u003e2 additional logic level or SUSI outputs\u003c\/p\u003e\u003cp\u003eShunting speed and momentum key selectable\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e14mm x 9mm x 2.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eProgramming\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDCC Service Mode \u0026amp; DCC PoM (Programming on Main)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAdditional Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRailCom® Feedback system\u003c\/p\u003e\u003cp\u003eUpgradable firmware\u003c\/p\u003e","brand":"BACHMANN","offers":[{"title":"Default Title","offer_id":32022775267418,"sku":"36-568A","price":64.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/36-568a-1401-extra-large.jpg?v=1735044228"},{"product_id":"bachmann-e-z-command-90-6-pin-dcc-decoder-dc-compatible","title":"BACHMANN E-Z Command 90 Degree 6 Pin DCC Decoder","description":"BACHMANN E-Z COMMAND 90 DEGREE 6 PIN DCC DECODER (DC COMPATIBLE) + BACK EMF\u003cp\u003eA 6 Pin DCC Decoder designed specifically for use in the Graham Farish N scale Class 3F ‘Jinty’ (item No. 372-21x) and Class 64XX ‘Pannier Tank’ (item No. 371-98x) locomotives.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHighlights include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDual-mode DCC\/DC decoder with Back EMF function\u003c\/p\u003e\u003cp\u003e1.0A continuous load\u003c\/p\u003e\u003cp\u003e2 powered function outputs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOperating Modes\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNMRA DCC with 14, 28 and 128 speed steps\u003c\/p\u003e\u003cp\u003eShort and Long addresses\u003c\/p\u003e\u003cp\u003eAdvanced consist addressing\u003c\/p\u003e\u003cp\u003eDCC and DC operation\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor Control Features\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1.0A continuous load\u003c\/p\u003e\u003cp\u003eBack EMF speed regulation\u003c\/p\u003e\u003cp\u003eSilent 15.6Khz pulse width modulation of motor voltage\u003c\/p\u003e\u003cp\u003eAdjustable acceleration and braking\u003c\/p\u003e\u003cp\u003e15 pre-set speed curves\u003c\/p\u003e\u003cp\u003e28-point user programmable speed curve\u003c\/p\u003e\u003cp\u003eSupports brake on DC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eFunction Outputs\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2 powered function outputs\u003c\/p\u003e\u003cp\u003e100mA load per output\u003c\/p\u003e\u003cp\u003eNMRA function mapping to match outputs with user selectable function key\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDimensions\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e14.5mm x 9.5mm x 3.5mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDefault Address\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAddress 3\u003c\/p\u003e","brand":"BACHMANN","offers":[{"title":"Default Title","offer_id":32025027280986,"sku":"36-556RA","price":36.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/36-556ra-1394-extra-large.jpg?v=1735044228"},{"product_id":"bachmann-e-z-command-8-pin-to-21-pin-adaptor","title":"BACHMANN E-Z Command 8 Pin To 21 Pin Adaptor","description":"BACHMANN E-Z COMMAND 8 PIN TO 21 PIN ADAPTOR","brand":"BACHMANN","offers":[{"title":"Default Title","offer_id":32025189810266,"sku":"36-559","price":9.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/36-559-1396-extra-large.jpg?v=1744319863"},{"product_id":"nce-cab06-encoder","title":"NCE Cab06 Encoder","description":"NCE, NCE Cab06 Encoder (NCE-CAB06e)\u003cp\u003eThe Cab06 uses a more conventional knob for speed control and is available with either a potentiometer (Cab06p) or digital encoder (Cab06e). Both varieties of the Cab06 can be set to YARD mode. Yard mode makes the speed knob act as a \"center off\" speed control. Turn the knob to the right and the loco will increase speed in the forward direction. Turn it to the left and speed will decrease until it gets to zero then it will start to increase speed in the reverse direction the farther you turn it to the left.\u003c\/p\u003e\u003cp\u003eEncoder or “E” cab is a RELATIVE speed control. There is NO position indicator nor feedback on the speed position since there are no stop and start points. The speed of the train is kept track by the command station only. Turning the knob up or down simply increase the current speed or decreases the current speed respectively. So if a given train speed is currently zero (Stopped), then turning up the knob will increase the speed above zero.  Keep turning the knob and more increase in speed.\u003cbr\u003e\u003cbr\u003eLikewise if a given train speed is NOT zero, turning the knob up or down simply increases the current speed or decreases the current speed respectively. Keep turning the knob up and more increase in speed. If instead you choose to turn down the knob, then the speed of the train will decrease.\u003cbr\u003e\u003cbr\u003eThe advantage of the “E” cab become very apparent when you switch trains.\u003cbr\u003e\u003cbr\u003eExample: If you are running train A at half speed, and then select train B which is stopped, train B remain stopped while train A keeps running at is half speed.    You can flip back and forth between two or more trains of different speeds and never have to worry about sudden speed changes. If you stopped a train you have selected, set the throttle down and unplug it but accidentally knock the throttle knob while it was unplugged, then plugging in the throttle will NOT result in the train suddenly moving.\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default Title","offer_id":32030945280090,"sku":"NCE-CAB06E","price":229.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/NCE-CAB06E.jpg?v=1722263108"},{"product_id":"nce-cab06-potentiometer","title":"NCE Cab06 Potentiometer Engineer Cab with LED Display","description":"NCE Cab06 Potentiometer \u003cp\u003eEngineer cab with LED display uses a more conventional potentiometer knob for speed control. Definite stop and starting points.\u003c\/p\u003e\u003cdiv\u003eNote** the speed setting of the knob is instantly applied to any locomotive selected.\u003c\/div\u003e\u003cp\u003eClear, easy-to-read display, select up to 6 loco recalls, F0-F28, select accessory, select macro.\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default Title","offer_id":32030946820186,"sku":"NCE-CAB06P","price":229.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/980640198.jpg?v=1750045970"},{"product_id":"nce-utp-panel-cab-bus-fascia-panel-w-rj12-p","title":"NCE UTP Panel, Cab Bus Fascia Panel w\/RJ12 p","description":"NCE UTP PANEL, CAB BUS FASCIA PANEL W\/RJ12 P \u003cp\u003eThis DCE's lowest cost, easiest to use cab bus panel. All four RJ-12 jacks are wired in parallel for easy plug and play use. This board also provides a convenient point to add additional 12 Volt cab bus power for long cable runs over 40 feet. Plug in a 2.5 mm \/ 5.5 mm 12 Volt DC \"wall wart\" power supply like the P114.\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default Title","offer_id":32031539331162,"sku":"NCE524-0207","price":69.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/1658140798.jpg?v=1722263113"},{"product_id":"dcc-concepts-the-template-pack","title":"DCC CONCEPTS Installation Template Pack","description":"DCC CONCEPTS THE TEMPLATE PACK\u003cp\u003eCobalt template suitable for use with all popular gauges from (N to O).\u003cbr\u003e\u003cbr\u003eAlso included is the drill needed to make the pilot holes for easy mounting and as a guide to drill the tie bar for the actuator wire.\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":32032378781786,"sku":"DCP-TMB","price":19.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCP-TMB_1476426_Qty1_1.jpg?v=1750044560"},{"product_id":"dcc-concepts-zen-mini-8-pin-harness-4-function-decoder-1","title":"DCC CONCEPTS Zen Black Decoder Mini 8 Pin Harness 4 Function Decoder","description":"DCC CONCEPTS ZEN BLACK DECODER MINI 8 PIN HARNESS 4 FUNCTION DECODER","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":36639982256289,"sku":"DCD-ZNMINI.4","price":48.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/Spec-Image-ZNMini.4.png?v=1737797559"},{"product_id":"dcc-concepts-zen-black-buddha-decoder-o-and-large-scale-up-to-5amps-6-functions-stay-alive","title":"DCC CONCEPTS Zen Black \"Buddha\" Decoder: O and Large Scale","description":"DCC CONCEPTS ZEN BLACK \"BUDDHA\" DECODER: O AND LARGE SCALE UP TO 5AMPS 6 FUNCTIONS STAY ALIVE\u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 5 Amps peak power\u003cbr\u003e– 3 Amps continuous power\u003cbr\u003e– 6 functions at 250mA each\u003cbr\u003e– On-board high-power stay-alive\u003cbr\u003e– 42mm x 27mm x 13mm\u003cbr\u003e– 12 screw terminals\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37257671540897,"sku":"DCD-ZBHP.6","price":106.35,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZBHP-6.png?v=1738719204"},{"product_id":"dcc-concepts-pack-of-3-abc-slow-or-stop-modules","title":"DCC CONCEPTS Pack of 3 ABC Slow or Stop Modules","description":"DCC CONCEPTS PACK OF 3 ABC SLOW OR STOP MODULES \u003cul\u003e\n\u003cli\u003eVery simple set-up of ABC.\u003c\/li\u003e\n\u003cli\u003eVersatile adjustment of ABC with both slow down and stop, intermediate running speed and acceleration rates\/distances.\u003c\/li\u003e\n\u003cli\u003eImplementation of adjustable slow down and stopping sections for automation of terminal station stopping, automatic storage and fiddle yards or even simple and direct signalling integration.\u003c\/li\u003e\n\u003cli\u003eLow cost ABC board with switchable orientation (via easy to use headers).\u003c\/li\u003e\n\u003cli\u003eBoth on-board or external triggering of the ABC board for “ABC section on or off”.\u003c\/li\u003e\n\u003cli\u003eFully Automated ABC triggered shuttle abilities, all totally within the Zen Black decoder.\u003c\/li\u003e\n\u003cli\u003eA choice of simple timer adjustment or external triggering for shuttle-related station stops, within the decoder.\u003c\/li\u003e\n\u003cli\u003eAddition of “multiple, easily set up station or passing loop stops”, all totally within the Zen Black decoder.\u003c\/li\u003e\n\u003cli\u003eAbility to use ABC boards interactively so that “Automated Shuttle Trains” can also share main line use.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37257672065185,"sku":"DCD-ABC.3","price":52.5,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ABC-3.png?v=1750044559"},{"product_id":"dcc-concepts-zen-black-decoder-midi-sized-decoder-with-8-pin-harness-high-power-6-functions","title":"DCC CONCEPTS Zen Black Decoder Midi-sized Decoder with 8-Pi","description":"DCC CONCEPTS ZEN BLACK DECODER MIDI-SIZED DECODER WITH 8-PIN HARNESS HIGH POWER 6 FUNCTIONS \u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003c\/p\u003e\u003cp\u003eThe Zen Midi High Power decoder is perfect for older HO\/OO gauge locomotives or for more modern O gauge locos.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 3 Amps peak power\u003cbr\u003e– 1.5 Amps continuous RMS power\u003cbr\u003e– 6 functions (2x 250mA, 4x 100mA)\u003cbr\u003e– Size 30mm x 18.3mm\u003cbr\u003e– 8-pin harness\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003cbr\u003e– Brown-Out Protection on-board\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37257672458401,"sku":"DCD-ZNM.HP.6","price":54.55,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/ZB-Maxi-cut-scaled.jpg?v=1734918783"},{"product_id":"dcc-concepts-zen-black-decoder-universal-fit-8-pin-with-6-functions","title":"DCC CONCEPTS Zen Black Decoder Universal Fit 8-Pin With 6 F","description":"DCC CONCEPTS ZEN DECODER UNIVERSAL FIT 8-PIN WITH 6 FUNCTIONS\u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003eThe DCD-ZN360.6 replaces the previous version – DCD-Z360\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 6 functions at 100mA each\u003cbr\u003e– 16mm x 14mm\u003cbr\u003e– 8-pin direct (fits in horizontal and vertical oriented sockets)\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003cbr\u003e– Brown-Out Protection on-board\u003cbr\u003e– Stay-Alive connection\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37257672753313,"sku":"DCD-ZN360.6","price":54.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZN360-6.png?v=1722257416"},{"product_id":"dcc-concepts-zen-black-decoder-super-thin-nano-8-pin-with-harness-2-function","title":"DCC CONCEPTS Zen Black Decoder Super Thin Nano 8 Pin with Harness 2 Function","description":"DCC CONCEPTS ZEN BLACK DECODER SUPER THIN NANO 8 PIN WITH HARNESS 2 FUNCTION \u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003eDCD-ZN8H.2 replaces the previous version – DCD-ZN8H\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 2 functions at 100mA each\u003cbr\u003e– 16mm x 9mm\u003cbr\u003e– 8-pin harness\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003cbr\u003e– Brown-Out Protection on-board\u003cbr\u003e– Stay-Alive connection\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37257673670817,"sku":"DCD-ZN8H.2","price":44.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZN8H-2-scaled_022f0343-f3b0-4f7b-91fd-02eed379b662.jpg?v=1736426539"},{"product_id":"dcc-concepts-wiper-pickups-12-pack","title":"DCC CONCEPTS Wiper Pickups (12 Pack)","description":"DCC CONCEPTS WIPER PICKUPS (12 PACK)","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37306601636001,"sku":"DCF-WP12","price":28.55,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCF-WP12-content-w.png?v=1736426539"},{"product_id":"dcc-concepts-zen-black-21-pin-w-8-pin-adaptor-6-functions-abc-module","title":"DCC CONCEPTS Zen Black 21 Pin w\/ 8 Pin Adaptor 6 Functions","description":"DCC CONCEPTS ZEN BLACK 21 PIN W\/ 8 PIN ADAPTOR 6 FUNCTIONS \u0026amp; ABC MODULE\u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003eThis pack includes 1x ABC board to use with automatic braking functionality.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 6 functions at 100mA each\u003cbr\u003e– 22mm x 16.5mm\u003cbr\u003e– 21-pin direct, 8-pin \u0026amp; harness\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003cbr\u003e– Stay-Alive connection\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37495162863777,"sku":"DCD-ZN218.6A","price":57.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZN218-6A-1.png?v=1748293199"},{"product_id":"dcc-concepts-zen-super-high-power-stay-alive-x1-disc","title":"DCC CONCEPTS Zen Super High Power Stay Alive x1","description":"DCC CONCEPTS ZEN SUPER HIGH POWER STAY ALIVE X1 (DISC) \u003cp\u003eZen SUPER high 2-wire power stay alive has exceptional power storage.\u003c\/p\u003e\u003cp\u003eIn fact, once charged, they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed!\u003c\/p\u003e\u003cp\u003eSuper Stay Alive is the natural partner for your Zen Decoders, however they are also ideal for adding to high quality sound decoders which allow stay alive installation – such as ESU,  Zimo and others\u003c\/p\u003e\u003cp\u003eDespite their excellent power storage ability, the Super Stay Alive is very good value… and slightly smaller than competitive products.\u003c\/p\u003e\u003cp\u003eInstallation is easy – Just match the blue and black wires to the blue and black stay-alive wires already attached to your Zen decoder. The overall size of Super Stay-Alives is a compact 32.3mm long x 16.1mm wide x 5.3mm high.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37514561454241,"sku":"DCD-SA2-SS.1","price":27.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/SA2-SS-1-1_dcf6c373-372a-443d-81e1-30ff088ac4b2.jpg?v=1736234376"},{"product_id":"dcc-concepts-3x-zen-black-buddha-decoder-o-and-large-sca","title":"DCC CONCEPTS 3x Zen Black Buddha Decoder: O and Large Scale","description":"DCC CONCEPTS 3X ZEN BLACK “BUDDHA” DECODER: O AND LARGE SCALE. UP TO 5 AMPS. 6 FN. BUILT-IN HIGH POWER STAY ALIVE.\u003cp\u003e**3-PACK**\u003c\/p\u003e\u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 5 Amps peak power\u003cbr\u003e– 3 Amps continuous power\u003cbr\u003e– 6 functions at 250mA each\u003cbr\u003e– On-board high-power stay-alive\u003cbr\u003e– 42mm x 27mm x 13mm\u003cbr\u003e– 12 screw terminals\u003cbr\u003e– One-Step Loco Setup\u003cbr\u003e– Shuttle mode (requires ABC boards for this to function)\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37514838868129,"sku":"DCD-ZBHP.6-3","price":359.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/DCD-ZBHP-6-3.png?v=1750044567"},{"product_id":"dcc-concepts-zen-blue-decoder-nem651-6-pin-direct-harne","title":"DCC CONCEPTS Zen Blue+ Decoder: NEM651 6-Pin Direct \u0026 Harne","description":"DCC CONCEPTS ZEN BLUE+ DECODER: NEM651 6-PIN DIRECT \u0026amp; HARNESS. 2 FUNCTION\u003cp\u003eZen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE step locomotive set-up and advanced brown-out protection.\u003cbr\u003eAll of our decoders are tested at least 3 times before we package them for sale, so we know that they all work perfectly when we sell them and you can be quite confident that reliability is assured.\u003cbr\u003eDCD-ZN68.2 replaces the previous version – DCD-ZN68.\u003c\/p\u003e\u003cp\u003eDecoder features:\u003cbr\u003e– 1.1 Amps peak power\u003cbr\u003e– 750mA continuous power\u003cbr\u003e– 2 functions at 100mA each\u003cbr\u003e– 13.5mm x 8.5mm\u003cbr\u003e– 6-pin direct, 6-pin harness and 8-pin harness\u003cbr\u003e– One-Step Loco Setup\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":37514840834209,"sku":"DCD-ZN68.2","price":48.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/ZN68-2-1.jpg?v=1735685296"},{"product_id":"nce-2-pin-plugs","title":"NCE 2 Pin Plug","description":"NCE 2 PIN PLUG\u003cp\u003e2 pin connector plug for use with Power Cab, SB5, Programming track output of PH-Pro, etc...\u003c\/p\u003e","brand":"NCE","offers":[{"title":"Default Title","offer_id":37803856527521,"sku":"NCE-2PIN","price":7.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/NCE411.jpg?v=1735332912"},{"product_id":"dcc-cconcepts-zen-3-wire-large-stay-alive-for-zen-black-b","title":"DCC CONCEPTS Zen 3-Wire Large Stay Alive for Zen Black \u0026 B","description":"DCC CONCEPTS ZEN 3-WIRE LARGE STAY ALIVE FOR ZEN BLACK \u0026amp; BLUE+ DECODERS\u003cp\u003eA single large Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders.\u003c\/p\u003e\u003cp\u003eUsable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive.\u003c\/p\u003e\u003cp\u003ePlease note that connection of a DCCconcepts Zen Stay-Alive to a non-DCCconcepts decoder may invalidate your warranty, please check documentation which came with your decoder for details.\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":39702025470113,"sku":"DCD-SA3-LG.1","price":47.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/Large-3-wire-SA-x-1-scaled.jpg?v=1736426539"},{"product_id":"dcc-concepts-zen-3-wire-medium-stay-alive-for-zen-black-b","title":"DCC CONCEPTS Zen 3-Wire Medium Stay Alive for Zen Black \u0026 B","description":"DCC CONCEPTS ZEN 3-WIRE MEDIUM STAY ALIVE FOR ZEN BLACK \u0026amp; BLUE+ DECODERS\u003cp\u003eA single medium Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders.\u003c\/p\u003e\u003cp\u003eUsable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive.\u003c\/p\u003e\u003cp\u003ePlease note that connection of a DCCconcepts Zen Stay-Alive to a non-DCCconcepts decoder may invalidate your warranty, please check documentation which came with your decoder for details.\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":39702028189857,"sku":"DCD-SA3-MD.1","price":47.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/Medium-3-wire-SA-x-1-scaled.jpg?v=1736609926"},{"product_id":"dcc-concepts-zen-3-wire-small-stay-alive-for-zen-black-bl","title":"DCC CONCEPTS Zen 3-Wire Small Stay Alive for Zen Black \u0026 Bl","description":"DCC CONCEPTS ZEN 3-WIRE SMALL STAY ALIVE FOR ZEN BLACK \u0026amp; BLUE+ DECODERS\u003cp\u003eA single small Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders.\u003c\/p\u003e\u003cp\u003eUsable with Zen Black, Zen Blue+, Lenz and ESU or any decoder with three-wire connections for Stay-Alive.\u003c\/p\u003e\u003cp\u003ePlease note that connection of a DCCconcepts Zen Stay-Alive to a non-DCCconcepts decoder may invalidate your warranty, please check documentation which came with your decoder for details.\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":39702030418081,"sku":"DCD-SA3-SM.1","price":43.65,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/Small-3-wire-SA-scaled.jpg?v=1744320142"},{"product_id":"dcc-concepts-solderless-i-link-connectors-25-pack","title":"DCC CONCEPTS Solderless i-Link Connectors (25-pack)","description":"DCC CONCEPTS SOLDERLESS I-LINK CONNECTORS (25-PACK)\u003cp\u003eWhile we really do prefer soldered connections, there are modellers who are unable or do not want to work under the layout with a soldering iron and times and places where its simply not convenient to solder.\u003c\/p\u003e\u003cp\u003eWe therefore looked long and hard at that is available to find the ideal connectors to make it easy, while also maintaining versatility and the best possible quality of connection.\u003cbr\u003eDCCconcepts i-Link connectors are the result:\u003c\/p\u003e\u003cp\u003e• We chose a 3-way connector as being the most versatile, so while many may only use the outer two for their power bus and dropper connections, those who also want to connect additional wires can easily do so.\u003cbr\u003e• We chose the terminal size so it will work reliably with both smaller and larger wires, and cope perfectly with a combination of bus wire and droppers as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneral instructions:\u003c\/strong\u003e\u003cbr\u003e• Measure wire length carefully, then Strip the wires LONGER than needed and twist the stripped portions.\u003cbr\u003e• If using the same entry port for two wires, then twist the two wires together as tightly as possible.\u003cbr\u003e• Cut off the excess or any “ragged ends”. Re-tighten if needed with a pair of pliers at the stripped end.\u003cbr\u003e• Insert the cut and stripped ends into the connector and SNAP” it closed. It will grip really well!\u003c\/p\u003e","brand":"DCC CONCEPTS","offers":[{"title":"Default Title","offer_id":39702033170593,"sku":"DCW-IL.25","price":19.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/9754\/products\/i-Link-cut-2.png?v=1740920474"}],"url":"https:\/\/www.hearnshobbies.com\/collections\/digital-systems-decoders-nce-controllers.oembed?page=6","provider":"Hearns Hobbies","version":"1.0","type":"link"}