GREEN STUFF WORLD Rolling Pin with Handle - Sett Pavement 15mm – Hearns Hobbies
x

Cart
Checkout Secure
Free Shipping Over $100 to Australia AUD
Badge
  • Image of GREEN STUFF WORLD Rolling Pin with Handle - Sett Pavement 15mm
  • Image of GREEN STUFF WORLD Rolling Pin with Handle - Sett Pavement 15mm

GREEN STUFF WORLD Rolling Pin with Handle - Sett Pavement 15mm

GSW8436574509939ES
Your Price:
$24.99
Check in Store Stock:
Quantity
 
Checkout Secure
Checkout Secure

GREEN STUFF WORLD Rolling Pin with Handle - Sett Pavement 15mm

Your Price:
$24.99
+ Add To Cart

Or 10 interest free payments from $2.49 with What's this?

Note: ZipPay, Latitude Pay & LayBuy are for online purchases only.

GREEN STUFF WORLD ROLLING PIN WITH HANDLE - SETT PAVEMENT 15MM
Textured Rolling Pins with handle capable of pressing a continuous repeated pattern on all kinds of sculpting putties, polymer clays, and pastes.
Made of clear PMMA plastic with amazing non-stick properties.

Their small size and the innovative design of their ergonomic handle make them an easy tool to transport and use.

There are different textures available that make them compatible with different modeling scales. The textures are scalable to cover large surface areas. Also, its handle allows us to print textures creating curves to give more realism to the model or base.

Roller Width: 4 cm (1.5 inches)
Roller Length with Handle: 14cm (5.5 inches)
Diameter: 2'5cm (1 inch)
Scale: 15-20mm (1/87-1/72)

* The textured rolling pins and their handles are presented unassembled. 
USE INSTRUCTIONS:
1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations.
2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this.
3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking.
4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture.
5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay.

MATERIALS:
There are plenty of different putties and clays on the market and all of them can be textured using the proper technique.
Usually, polymer clay (Fimo or Sculpey type) is quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays is around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn!
In the case of epoxy putties, there are a variety of techniques that achieve similar results. The good thing is. you do not need to bake them, so they may be applied directly onto plastic bases.
For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using Sculptor Vaseline.
Other epoxy putties like Milliput / Magic Sculpt / Aves Apoxie Sculpt, for example, are also suitable, but we wouldn't recommend wetting them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use.

CARE INSTRUCTIONS:
After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required.

SAFETY:
To ensure safety, children should be closely monitored by a responsible adult.

Order before 11am, and your item will ship same day (Australia Only)

If your order is coming from more than one location: We suggest you order with Standard Shipping rather than Express (this is due in part to transportation time between stores to get your order combined and sent from 1 location which will delay your "express" postage option).


NOTE - On large mail items (over 1 Metre) Large mail items over 1m will have a delay due to shipping via courier being needed.

Incorrect Delivery Info/Contact Details:
Hearns Hobbies is not held accountable for incorrect delivery/contact information entered in by the user at checkout. Please check your details are correct before submitting your order. If you have entered your details incorrectly when you checked out, please contact us via phone or direct message IMMEDIATELY.

At Hearns Hobbies, we are very efficient with processing orders (meaning your order may already be packed and sorted) so speedy notification is required to allow for immediate intervention in order to change your details.

For more information, or if you are buying Internationally? Feel free to read our Shipping Policy before ordering

Insurance:

It is highly recommended by Hearns Hobbies to opt for additional Insurance or "Extra Cover" to protect your delivery from possible damage or loss on the carriers part. If an item that is not insured is lost/damaged during delivery/transit then the lost item compensation/refund is up to the discretion of the carrier.

Hearns Hobbies offers shipping with Insurance/"Extra Cover", however this option is not applied by default and is at the discretion of the buyer to select upon checkout. Standard shipping DOES NOT include insurance by default.

International Shipping Insurance:

International shipping by default does not come with insurance. Please be aware of this before checking out. If you would like insurance please Contact Us beforehand so we can see what can be organised.

Hearns Hobbies IS NOT responsible for refunding or replacing a damaged/broken items with no insurance.

We CAN NOT ship any dangerous goods internationally, if you place an order for dengerous goods we will have to apply a restocking fee.

Read AUSPOSTS statement on Compensation on damaged goods: https://auspost.com.au/receiving/delayed-lost-or-damaged-items/compensation

Read more about Insurance and refunds on our Refund Policy page: https://www.hearnshobbies.com/policies/refund-policy

What are pre-orders?
Pre-orders, are an order for a product placed before it is available for purchase.

What are back-orders?
Back-Orders allow you to place an order for a product, that is temporarily out of stock.

How much are pre-orders / back-orders?
Prices may vary slighlty (from what was paid on the day of the order). Whilst we try to maintain the lowest possible price, factors such as supplier price and exchange rate fluctuations, could affect the final price when we receive it in store.

Note: Pre-orders could in some cases be a deposit price, without any knowledge of a final price from the Supplier or Manufacturer. In all cases you will be notified if there is a significant price change, from what was originaly paid, before shipping.

How long do I have to wait for my pre-order / back-order?
All orders will be shipped once stock has arrived and full payment has been made, with the exception of Manufacturer Release Dates on some Pre-order Products. Waiting time depends on many factors, which are mostly out of our control. They could be for example, Manufacturing delays (due to global pandemics), Supplier shortages, or shipping delays.

Why am I being charged for my pre-order/back-order, even though the product isn’t released/re-stocked yet?
This is pre-payment for an item's payment and delivery costs that isn’t released yet to ensure as soon as it arrives your order can be fulfilled and sent out to you a.s.a.p. Not all orders will be charged shipping depending on size, and total order amount (see our website for current shipping to find out more and our shipping policy for more information).

Read our full FAQ on Frequently Asked Questions page.

For detailed information on shipping of pre orders please read our Shipping Policy.

For detailed information on returns of pre orders please read our Returns Policy.
GREEN STUFF WORLD ROLLING PIN WITH HANDLE - SETT PAVEMENT 15MM
Textured Rolling Pins with handle capable of pressing a continuous repeated pattern on all kinds of sculpting putties, polymer clays, and pastes.
Made of clear PMMA plastic with amazing non-stick properties.

Their small size and the innovative design of their ergonomic handle make them an easy tool to transport and use.

There are different textures available that make them compatible with different modeling scales. The textures are scalable to cover large surface areas. Also, its handle allows us to print textures creating curves to give more realism to the model or base.

Roller Width: 4 cm (1.5 inches)
Roller Length with Handle: 14cm (5.5 inches)
Diameter: 2'5cm (1 inch)
Scale: 15-20mm (1/87-1/72)

* The textured rolling pins and their handles are presented unassembled. 
USE INSTRUCTIONS:
1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations.
2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this.
3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking.
4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture.
5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay.

MATERIALS:
There are plenty of different putties and clays on the market and all of them can be textured using the proper technique.
Usually, polymer clay (Fimo or Sculpey type) is quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays is around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn!
In the case of epoxy putties, there are a variety of techniques that achieve similar results. The good thing is. you do not need to bake them, so they may be applied directly onto plastic bases.
For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using Sculptor Vaseline.
Other epoxy putties like Milliput / Magic Sculpt / Aves Apoxie Sculpt, for example, are also suitable, but we wouldn't recommend wetting them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use.

CARE INSTRUCTIONS:
After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required.

SAFETY:
To ensure safety, children should be closely monitored by a responsible adult.

Order before 11am, and your item will ship same day (Australia Only)

If your order is coming from more than one location: We suggest you order with Standard Shipping rather than Express (this is due in part to transportation time between stores to get your order combined and sent from 1 location which will delay your "express" postage option).


NOTE - On large mail items (over 1 Metre) Large mail items over 1m will have a delay due to shipping via courier being needed.

Incorrect Delivery Info/Contact Details:
Hearns Hobbies is not held accountable for incorrect delivery/contact information entered in by the user at checkout. Please check your details are correct before submitting your order. If you have entered your details incorrectly when you checked out, please contact us via phone or direct message IMMEDIATELY.

At Hearns Hobbies, we are very efficient with processing orders (meaning your order may already be packed and sorted) so speedy notification is required to allow for immediate intervention in order to change your details.

For more information, or if you are buying Internationally? Feel free to read our Shipping Policy before ordering

Insurance:

It is highly recommended by Hearns Hobbies to opt for additional Insurance or "Extra Cover" to protect your delivery from possible damage or loss on the carriers part. If an item that is not insured is lost/damaged during delivery/transit then the lost item compensation/refund is up to the discretion of the carrier.

Hearns Hobbies offers shipping with Insurance/"Extra Cover", however this option is not applied by default and is at the discretion of the buyer to select upon checkout. Standard shipping DOES NOT include insurance by default.

International Shipping Insurance:

International shipping by default does not come with insurance. Please be aware of this before checking out. If you would like insurance please Contact Us beforehand so we can see what can be organised.

Hearns Hobbies IS NOT responsible for refunding or replacing a damaged/broken items with no insurance.

We CAN NOT ship any dangerous goods internationally, if you place an order for dengerous goods we will have to apply a restocking fee.

Read AUSPOSTS statement on Compensation on damaged goods: https://auspost.com.au/receiving/delayed-lost-or-damaged-items/compensation

Read more about Insurance and refunds on our Refund Policy page: https://www.hearnshobbies.com/policies/refund-policy

What are pre-orders?
Pre-orders, are an order for a product placed before it is available for purchase.

What are back-orders?
Back-Orders allow you to place an order for a product, that is temporarily out of stock.

How much are pre-orders / back-orders?
Prices may vary slighlty (from what was paid on the day of the order). Whilst we try to maintain the lowest possible price, factors such as supplier price and exchange rate fluctuations, could affect the final price when we receive it in store.

Note: Pre-orders could in some cases be a deposit price, without any knowledge of a final price from the Supplier or Manufacturer. In all cases you will be notified if there is a significant price change, from what was originaly paid, before shipping.

How long do I have to wait for my pre-order / back-order?
All orders will be shipped once stock has arrived and full payment has been made, with the exception of Manufacturer Release Dates on some Pre-order Products. Waiting time depends on many factors, which are mostly out of our control. They could be for example, Manufacturing delays (due to global pandemics), Supplier shortages, or shipping delays.

Why am I being charged for my pre-order/back-order, even though the product isn’t released/re-stocked yet?
This is pre-payment for an item's payment and delivery costs that isn’t released yet to ensure as soon as it arrives your order can be fulfilled and sent out to you a.s.a.p. Not all orders will be charged shipping depending on size, and total order amount (see our website for current shipping to find out more and our shipping policy for more information).

Read our full FAQ on Frequently Asked Questions page.

For detailed information on shipping of pre orders please read our Shipping Policy.

For detailed information on returns of pre orders please read our Returns Policy.

GREEN STUFF WORLD Rolling Pin with Handle - Sett Pavement 15mm

$24.99

Added to cart!
Spend over $100 and receive free shipping within AustraliaAUD Free shipping when you spend XX more You Have Qualified for Free Shipping Open for Click and Collect. Same Day Delivery also available. Please read our Coronavirus Update Page for more details. Updated as of 28/09/21 Spend $x more to get FREE shipping Free Shipping Over $100 to Australia AUD You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping